About the Role
The company is seeking a Senior / Specialist Pre-Startup Safety Review (PSSR) Lead with onshore site experience in MEGA EPC projects to be based in Abu Dhabi for a PMC project. The PSSR Lead will be responsible for coordinating PSSR activities for projects, modifications, and facilities prior to commissioning, start-up, and the introduction of hydrocarbons or other operational milestones. Acting as the Subject Matter Expert (SME) for PSSR, the lead will independently verify the readiness of facilities, systems, documentation, procedures, and organizational arrangements for safe start-up while maintaining independence from the Project, MOC, Turnaround, and Operations teams.
Ready to apply for roles like this?
Unlock the company name and direct application link. Subscribers get instant access to fresh jobs across Dubai, Abu Dhabi and Riyadh, many with visa support.
Unlock employer & apply directly
Minimum Qualification and Experience
The PSSR Lead must meet the following requirements:
- Minimum qualification as per the PMC Agreement.
- Demonstrable experience in PSSR, Process Safety, Commissioning, Start-up, Operations Readiness, Technical Safety, and/or HSE assurance for major Oil & Gas facilities.
- Previous experience in a Lead, Senior Engineer, SME, or equivalent capacity for PSSR/process safety/operations readiness activities.
- Experience in PMC/EPCM/EPC environments for major Oil & Gas projects is highly desirable.
- Experience covering the project lifecycle from engineering, construction, and commissioning through start-up and handover to Operations.
- Strong working knowledge of process and technical safety requirements, including PSSR, Management of Change (MOC), HAZOP, HAZID, SIL/LOPA, SIMOPS, commissioning, and start-up readiness.
- Familiarity with applicable ADNOC requirements, international Oil & Gas standards, codes, and industry good practices is preferred.
- Previous ADNOC Group or major Middle East Oil & Gas project experience is preferred.
- The candidate shall possess sufficient authority, competence, and independence to challenge Project/Contractor readiness and recommend postponement of the PSSR or start-up where the required information, documentation, or physical readiness has not been adequately demonstrated.
Key Responsibilities
The PSSR Lead / PSSR Team Leader will oversee the following:
PSSR Planning and Leadership
- Lead, plan, coordinate, and execute PSSR activities in accordance with COMPANY requirements and approved procedures.
- Technically confirm the appropriate type and scope of PSSR checklist to be applied.
- Review and endorse the proposed PSSR Team Members nominated by the Asset Owner.
- Verify that the PSSR scope adequately addresses all applicable project, facility, operational, safety, and start-up requirements.
- Establish the PSSR execution plan, review methodology, schedule, required documentation, and site verification requirements.
- Align PSSR meetings and site-visit schedules with the Project Manager, MOC focal point, Asset Owner, and other relevant stakeholders.
Readiness Assessment
- Review the overall readiness of the facility/system before commencement of the formal PSSR.
- Verify availability and adequacy of required engineering, construction, commissioning, operations, HSE, and process-safety documentation.
- Confirm applicable design changes and Management of Change requirements have been properly incorporated and closed or appropriately addressed.
- Assess physical completion and readiness through site inspections and field verification.
- Verify that safety-critical systems and safeguards relevant to start-up are available, tested, and appropriately documented.
- Confirm relevant operating, maintenance, emergency-response, and start-up procedures are available as required for safe operation.
Independent PSSR Authority
- Determine whether adequate information and readiness exist to proceed with the PSSR independently.
- Discontinue or postpone the PSSR review where necessary readiness, information, documentation, or site conditions have not been established.
- Decide whether the PSSR should commence as scheduled or be postponed when essential information is unavailable or incomplete.
- Escalate significant safety, technical, or readiness concerns to the appropriate COMPANY/Project management.
Team Coordination
- Lead multidisciplinary PSSR review teams.
- Assign responsibilities to PSSR Team Members for document review, discipline-specific assessment, and field verification.
- Coordinate inputs from Engineering, Construction, Commissioning, Operations, Maintenance, HSE, Process Safety, and other relevant disciplines.
- Ensure the review is conducted objectively and findings are supported by appropriate evidence.
Site Verification
- Lead PSSR site inspections and field verification activities.
- Verify consistency between approved engineering documentation and actual installed/commissioned facilities, as applicable to the PSSR.
- Identify incomplete work, deficiencies, and conditions that could affect safe start-up or operation.
- Ensure safety-critical findings are clearly identified, classified, and communicated for action.
Findings, Reporting, and Close-Out
- Ensure timely completion of the PSSR and issuance of documented findings.
- Lead preparation and finalization of the PSSR report, findings register, action list, and associated recommendations.
- Clearly identify findings/actions that require closure before start-up and those that may be managed after start-up subject to COMPANY approval.
- Review evidence submitted for closure of PSSR findings and confirm technical adequacy.
- Monitor PSSR action close-out and promptly escalate overdue or critical actions.
- Maintain complete PSSR documentation, records, and traceability for audit and project handover purposes.
- Provide PSSR status and key risks to Project/COMPANY management as required.
Required Technical Competencies
The candidate shall demonstrate strong knowledge and practical experience in:
- Pre-Startup Safety Review (PSSR)
- Process Safety Management
- Management of Change (MOC)
- HAZOP / HAZID
- SIL / LOPA concepts
- Engineering and design safety reviews
- Mechanical Completion
- Pre-Commissioning and Commissioning
- Start-up and Operations Readiness
- SIMOPS
- Safety-critical equipment and systems
- Operating and maintenance procedures
- Project handover and Operations acceptance
- Field/site verification and punch-list management
- Risk assessment and action close-out
- Multidisciplinary Oil & Gas project interfaces
Leadership and Behavioral Competencies
The PSSR Lead shall:
- Demonstrate strong technical leadership and sound professional judgment.
- Maintain independence and objectivity throughout the PSSR process.
- Have the confidence and authority to challenge incomplete or inadequately demonstrated readiness.
- Be capable of managing multidisciplinary stakeholders and resolving technical interfaces.
- Demonstrate strong analytical and problem-solving capability.
- Communicate findings clearly and concisely to both technical personnel and management.
- Be capable of working effectively within a large PMC/Project Management Team environment.
- Demonstrate a strong commitment to process safety and safe start-up principles.
Preferred Additional Qualifications
The following would be advantageous:
- Professional engineering registration or chartered status.
- Recognized Process Safety / Functional Safety / HSE qualification.
- Formal training in PSSR, HAZOP, HAZID, LOPA, or Process Safety Management.
- Previous experience leading PSSR for large-scale upstream/offshore/onshore Oil & Gas facilities.
- Familiarity with ADNOC engineering, HSE, process-safety, commissioning, and operations-readiness requirements.
- Previous PMC experience on ADNOC or comparable major operator projects.